Impact Hop Up Display Stand

Only %1 left

Collapsible framework that supports a one-piece fabric graphic. Choice of sizes

  • 10 year hardware warranty
  • Choice of 4 frame sizes
  • Assembly and disassembly can be done in minutes
  • Lightweight and portable
  • Supplied in wheeled trolley bag
  • Fast turnaround time available
As low as £372.00 £310.00

Seen it cheaper?

Challenge us to beat that price!

Contact our sales team now
Order and submit artwork within to get it by...
  • Friday 10th Januarystandard
  • Tuesday 14th Januaryeconomy
  • Tuesday 7th Januaryexpress

 

Impact Hop Up Display Stands feature a collapsible framework and one piece printed fabric graphic to provide a display back wall that is free from panel seams and joins. The printed graphic panel can be left attached to the frame for storage allowing the Hop Up Display Stand to be assembled in only a few minutes.

   
Hop Up Display Stand

High Impact One Piece Fabric Graphics

The Impact Hop Up Display utilises a collapsible aluminium 'pop up' frame that is strong, stable and fast to assemble.

Instead of using magnetic panels that have to be tiled up side by side on the framework, the graphic is printed in one piece onto fabric.

The fabric print has velcro sewn to the rear perimeter that attaches to equivalent velcro on the outside edge of the frame.

Hop Up Stands have no visible joins between panels on the face of the display that can detract from the artwork design and they are quick and easy to assemble. Hop Up Stands are ideal for use at events, conferences, presentations and photo opportunities where a professional display back wall is required.

 

 

   

Compact And Durable For Transport

One of the greatest bugbears with traditional pop up stands is that the rollable printed panels are bulky and prone to accidental damage either in transit or during the assembly process.

Hop Up Stands use a fabric print that is very durable and not susceptible to such damage. The print can be left attached to the frame when you dismantle it allowing the entire display to pack away into a compact wheeled trolley bag for transport.

If you want to update the artwork on your display, the print can be removed quickly and easily and new fabric graphics can be purchased separately.

Should your print become dirty or marked in use, you can also remove it and machine wash it too.

 

 

 

Hop Up Display Stand Frame
   
Hop Up Display Frame

Quick Release Frame Locking Mechanism

The aluminium Hop Up Display frame opens up from it's folded state in less than 30 seconds. There are no separate connectors or fixings bars needed to assemble the display and no tools are required.

Simply open up the display and push the two halves of the interlocking connector arms together to securely hold the frame in the upright position.

To pack away the Hop Up Display stand, squeeze the lever on each connecting arm to disengage them and allow the frame to fold down.

Disassembly of the display is possible in less than a minute!

   
Hop Up Display Stand Velcro

Velcro Graphic Attachment

A continuous perimeter band of velcro allows the graphic to be permanently attached to the front face of the Hop Up Display Stand frame. When the frame is expanded open, the print will tension automatically.

The printed graphic is wrapped around the sides and to the rear of the frame manually to finish the assembly process.

Small squares of velcro are positioned on the hubs of the frame on the rear providing points onto which the print can grab into place.

Please take a look at our video that shows the assembly process in detail.

   

Choice Of Hop Up Display Stand Sizes

Hop Up Display Stands are available in a choice of size. The frame sizes are denoted by how many box sections or 'quads' the frame is made from. All of our standard frames are made to 3 x quads tall for an assembled height of 2260mm. Hop Up Stands are available in a choice of four width options.

Dimensions

  • 3x2 Frame - 2260mm high x 1525mm wide x 315mm deep
  • 3x3 Frame - 2260mm high x 2260mm wide x 315mm deep
  • 3x4 Frame - 2260mm high x 2995mm wide x 315mm deep
  • 3x5 Frame - 2260mm high x 3730mm wide x 315mm deep
   
Hop Up Display Stand Sizes
   

Hop Up Display Packed Dimensions & Weight

Impact Hop Up Display Stands come supplied in a durable wheeled trolley bag allowing for convenient transport and storage.

  • Case Dimensions: 470 x 285 x 870mm

 

  • 3x2 Impact Hop Up Display Stand Weight: 7kg
  • 3x3 Impact Hop Up Display Stand Weight: 10kg
  • 3x4 Impact Hop Up Display Stand Weight: 13kg
  • 3x5 Impact Hop Up Display Stand Weight: 16kg

 

Please note that weights and dimensions and approximate.

Impact Hop Up Display Stand Bag
   

Hop Up Display Stand Printing

We are proud to handle all aspects of printing production in-house at our UK-based factory in Staffordshire.

Hop Up Display graphics are printed using our industrial EFI FabriVu printer that offers outstanding quality with a 2,400 dots per inch (dpi) maximum resolution.

Hop Up Display Stand Sewing

Sewing of the Hop Up Display graphics is handled in-house too by our team of experienced technicians. Every printed graphic we produce is inspected for quality and is physically assembled and tested before dispatch

Hop Up Display Stand Printing Hop Up Display Stand Sewing
   
More Information
Approximate Weight3x2 - 7Kg
3x3 - 10Kg
3x4 - 13Kg
3x5 - 16Kg
MaterialDisplay polyester fabric
Resolution2440dpi
Fire-resistanceDIN 4102 Class B1
RecyclableAluminium frame can be recycled
WaterproofNot recommended for outdoor use
Scratch-resistanceHigh scratch resistance
Print methodDye-sublimation process
PrintingNo Solvents (VOC's) used in printing process
ColourSilver
Dimensions (HxWxD)3x5 - 2260 x 3730 x 295mm
3x4 - 2260 x 2995 x 295mm
3x3 - 2260 x 2260 x 295mm
3x2 - 2260 x 1525 x 295mm
Case dimensions (mm): 470 x 285 x 870mm
Type of DisplayFree Standing
Type of Banner StandFabric display stand

View our product video

Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

FAQs

How to supply and transfer your artwork

Once you have placed an order for a printed product, we will need you to provide us with your artwork, so we could start the production. It's important that any artwork you provide is compatible for the product(s) that you have ordered. You can find instructions regarding particular artwork requirements on the relevant product pages of our website.

If you can't provide artwork at the correct size or format then please get in touch. We offer a full in-house design service for all products and we can provide an individual quote based on your needs and requirements. Just email us with your requirements by contacting our designer directly at [email protected] or feel free to use our online chat facility for a quick consultation.

You can upload your artwork in one of several ways

  • Go to your account’s dashboard and click on an “Upload” button located next to your order number.
  • Send your artwork directly to [email protected]
  • Send your artwork to us by one of the many free file transfer websites (we recommend www.wetransfer.com)
  • Send your artwork to us using our own secure FTP server (details below)

https://printdesigns.de.quickconnect.to/

username: ftpc
password: monday679

If you send your artwork via email, file transfer service or FTP, please send an email to [email protected] and provide your order number along with any other specific instructions.

When we receive your artwork we will update you to let you know that your files have been received. We will also confirm that the artwork you have provided is suitable for the products that you have ordered.

Is a signature required on delivery of my order?

We use a range of courier companies to deliver our exhibition stands and other products. Most couriers will require a signature on the delivery of your order to confirm the date and time of the delivery (and that the goods are received in good condition).

Normally we will email the tracking information for your order on the evening of the day of dispatch so that you can know to expect the delivery. If you want to check the progress of the delivery then you can enter the tracking information online for an update or call the telephone number provided.

If no-one is available to sign for your delivery then the courier will normally leave a card to say that a delivery was attempted and would then take the parcel away. The delivery is normally re-attempted the next working day.

Depending on the courier, the delivery could be re-attempted two or three times before the parcel would eventually be returned to us. If the courier attempts delivery on multiple occasions with no success resulting in the parcel being returned then we can re-dispatch the parcel again for you but would bill the carriage cost again.

Sometimes we are asked if the courier can telephone in advance of the delivery being made. Unfortunately this is not possible because the couriers are not generally provided with mobile telephones. All instructions tend to be relayed to the courier by the depot via a hand held computer terminal that the driver carries.

If you need to receive a delivery on a particular day but are not going to be around to sign for the parcel then the best advice we can give is to write a note explaining that you are expecting a delivery but are not around to receive it. You can request the courier leaves the parcel with no signature or with a neighbor. We would advise that you write the consignment note of the parcel on the letter and sign it.

Ultimately it is down to the drivers discretion whether to leave the parcel and so we cannot accept responsibility for late deliveries if there is no one available to accept the order when the delivery is made.

How long does production and delivery take?

For most items that are printed, the standard production time is 5 working days.

Based on standard production if an order arrives on a Monday morning (first thing) then the goods should be dispatched no later than the following Monday.

If orders are placed later in the day then we would not normally class that day as a full day’s production time and therefore an order placed on a Monday afternoon would be dispatched no later than a week the following Tuesday.

For rush orders, we offer an express production service whereby the item can printed and dispatched in 1-2 working days. An item placed on express production on a Monday would generally ship no later than Tuesday the day after. We recommend you call us prior to placing an express order to confirm your delivery schedule.

We offer a variety of courier services selectable from the checkout on our website. Standard delivery is normally next working day from the day of dispatch (so an order dispatched on a Tuesday would be delivered on Wednesday).

We also offer timed delivery services (pre-noon, pre 10.30am, pre 9am etc) at additional costs.

Please note that although we always do everything within our power to ensure that goods are dispatched on-time, there can be rare occasions whereby production could be delayed due to circumstances outside of our control. Such circumstances could involve a power outage, equipment failure etc.

With regards to courier delivery times, there is no insurance or consequential insurance for late deliveries with next day couriers. We would always recommend that you arrange for a delivery to be made in advance of your required date just in case!

For no-fail deliveries we can arrange for a dedicated vehicle and driver – please call for prices.

Can you colour match to Pantone references?

 

The Pantone colour scale is an industry standard series of reference colours for use in the printing industry.

Pantone or spot colours are normally used by lithographic or screen printers when printing items with a limited number of colours (for example a letterhead, or stationary). Pantone ink is purchased by the printer who then creates a screen or plate specifically for that colour ink.

We use a CMYK (full colour) process of printing rather than a spot colour method. With a CMYK print process, Cyan, Magenta, Yellow and Black are mixed by layering ink on top of each other to create a full-colour image. Sometimes other colours like light cyan and light magenta are also used to improve print quality.

We cannot guarantee to match all Pantone colours because some Pantone’s contain pigments that push the colour outside of the spectrum of colours available with CMYK inks.

An example would be Pantone 021 orange which is a very bright, almost neon colour. It is impossible to get a close match to this colour with CMYK printing because the colour is too bright.

There are many other colours in the Pantone spectrum that are relatively easy to match but also some that are impossible to closely match. Pantone sell a solid to process guide book which is useful because the Pantone colour is shows next to the nearest CMYK colour as two separate colour chips. If you can access a Pantone solid to process guide book then you can see at a glance how closely your pantone colour can be matched with a CMYK printing process.

All artwork supplied should be set as CMYK colour mode, not Pantone spot colour. If you do not have a Pantone solid to process guide book and need some advice as to the best CMYK colour value to use in the artwork, please call and we can help.

If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article. The cost is £20 and includes delivery of the proof to a mainland UK address.

What resolution does my artwork need to be?

As a rule of thumb, we recommend that artwork resolution should be 150dpi or greater at full scale for a large format print (anything A2 or larger).

If you are designing your artwork at a reduced scale (say half or quarter size) then the resolution of the artwork needs to be increased proportionally so that when the file is blown-up for printing, the quality is high enough to allow for it.

So, if setting your artwork at half size then double the resolution to 300dpi or if setting the artwork at quarter size then quadruple the resolution to 600dpi!

What if my image is not big enough for 150dpi output at full size?

When printing images at very large sizes, it is not uncommon that the original file be unavailable at a large enough size to provide 150dpi output and this does not mean that you cannot use the image! In fact much smaller images can sometimes be OK for print.

Bear in mind factors that determine if the image is acceptable:-

  1. The viewing distance of the image (how closely it will be examined)
  2. The content of the image itself (does it contain lots of intricate detail or is it a more abstract image).

Most displays have a viewing distance of at least a couple of Metres and so a large background image need not contain pin-sharp detail. If the image is abstract or does not contain precise detail then you can ‘get away’ with using a smaller image.

If your image is small then you can up-sample it in an application like Photoshop which increases the image size by splitting the pixels (interpolating) into more pixels. A byproduct of this process is the image can become ‘softer’ and it is therefore a good idea to zoom-in on the picture at approximately finished size on screen and then stand back from the display to gain an impression of what the printed result would be like.

If you have concerns about image quality then let us know about it when you submit your artwork and one of our team can take a look for you.

What types of artwork files can you accept?

 

We support most ‘industry-standard’ artwork file types. Examples of supported formats include:-

  • Adobe Photoshop
  • Adobe Indesign
  • Adobe Illustrator
  • Quark XPress

We also accept generic artwork formats including:-

  • JPG
  • TIFF
  • EPS
  • PDF
  • BMP
  • PNG

When supplying artwork from the original design package (for example an Adobe Indesign file), it is important to send over all linked images and fonts as well as the Adobe Indesign document itself.

If you are exporting artwork from a design package into a generic format such as PDF then there is generally no need to supply artwork components such as images and fonts separately unless you need us to re-open and edit the file for you.

Most people would typically supply us with the exported generic file rather than the original artwork file and links.

Available Payment Methods

We accept most common credit cards including Mastercard, Visa and American Express via the payment gateway on our website. We also can accept payments via PayPal.