Seen it cheaper?
Challenge us to beat that price!
The Easilink Kit is designed for use with the Twist 2 Banner Stand or Twist 2 AV Banner Stand and allows any two stands to be connected to create a larger display wall. Each Twist Banner Stand Easilink kit contains magnetic bars that are used to bridge the seam between the panels plus the two linking pins that are used to hold the top and bottom rails on the graphics together.
One linking kit is required to form the joint between any two panels. So if ordering Twist Banner Stand Easilink Kits, you will need to calculate the total number of joins that you have in your arrangement of stands.
Easilink kits are used for joining Twist 2 Banner Stands or Twist 2 AV Banner Stands directly together and as such, Easilink kits can be used for creating straight walls only.
In this example, we have 4 x Twist 2 Banner Stands connected to create a straight wall. There are three panel joins so three Twist Banner Stand Easilink Kits would be required.
If you would like to create a curve between any pair of Twist Banner Stands or Twist AV Banner Stands then rather than using a Twist Banner Stand Easilink Kit, you will require a Twist Banner Stand Flexilink Kit.
A Flexilink kit consists of a 500mm wide printed panel that is fitted with flexible top and bottom rails. The panel sits between any two Twist Banner Stands to create a flexible hinge.
Flexilink Kits consist of the printed panel plus two Easilink Kits therefore giving you everything you need to join the flexible panel between the Twist Banner Stands.
Note that Flexilink Panels always have to sit in between two Twist 2 Banner Stands or Twist 2 AV stands. You cannot connect to Flexilink Panels together directly.
Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support
