Our Basics curved counters are both stylish and functional which makes them ideal for use at events, exhibitions and roadshows as a reception desk or workstation. The Basics Curved Counter combines functionality with a simple design. It can be assembled in as little as a few minutes and with no tools required. Basics Curved Counters come with a plain grey wrap-around panel but can also be supplied with an additional printed panel too.
Strong and Simple Design
The Basics Curved Counter is very simple in design, consisting of a top, bottom and a corrugated tambour wrap.
Assembly of the basic curved counter is very straightforward. Simply place the base of the unit on the floor and attach the supplied grey PVC tambour wrap with velcro before setting the tabletop in place
Although the construction is very simple, the Basics Curved Counter is very strong and can support up to 50 kg of weight when spread evenly over the tabletop surface.
Rear Aperture & Generous Tabletop For Storage & Display
The reverse of the Basics Curved Counter has an aperture which acts as a kneehole if you are pulling up a chair or bar stool next to it.
The rear aperture also provides access to some useful space within the counter. Items such as leaflets, brochures or giveaways can be stored inside the counter where they are hidden from sight.
The table surface of the counter measures 910mm wide x 470mm deep which provides ample room to take customer information or display literature or products.
Interchangeable Top Colour
The Basics Curved Counter comes with one top/bottom that has a beech wood surface finish and one top/bottom that has a black surface finish.
You can choose which piece you would like to use as the top of the counter and which piece you would like to use as the bottom of the counter. This allows the top surface of the counter to be either beech wood or black according to your preference.
Custom Printing Available
Supplied with a plain grey PVC tambour wrap as standard, this product can also be supplied with an optional bespoke printed graphic panel for a personalised look.
Optional graphic panels are printed onto a heavyweight stoplight polyester film that is laminated with a crystal, scratch-resistant finish. The printed panel attaches over the top of the pre-existing grey tambour wrap and can be used time and time again. Our graphics can be wiped clean should they become marked whilst being handled.
Additional printed panels can be purchased separately in the future if you would like to update your messaging. Please refer to the 'downloads' tab for artwork set-up information.
Carry Bag Set Included
The Basics Curved Counter is supplied with a dual carry bag set.
One carry bag is designed to store the top and bottom of the counter and the other tube bag contains a cardboard inner and is designed for storage of the PVC tambour wrap and the printed graphic panel (graphic panels are optional).
The overall packed weight of the Basics Curved Counter is approximately 13.80 kg. The optional printed graphic panel weighs approximately 2 kg.
Optional graphic panels have a crystal, scratch resistant laminated finish
Print method
Digital ink jet printing onto photo coated heavyweight polyester
Type of Display
Portable pop up display counter
Easy-change graphic
Yes
Waterproof
Not recommended for outdoor use
Dimensions (HxWxD)
Assembled dimensions: 926mm high x 910mm wide x 470mm deep. Packed dimensions (2 bags) - 480mm x 880mm x 60mm (top and bottom in bag) + 170mm diameter x 940mm long (tambour and graphic in tube bag)
