The Twist Banner Stand is a well established modular display system. You can connect multiple banners together to create straight walls or introduce 'flexilink' curved hinge panels to create shaped walls.
A range of add-on accessories are available for the Twist banner stand allowing you to tailor the display to your particular requirements.
Introduced in 2003, the Twist Banner Stand concept involved a modular banner display that could be connected to form larger display walls of different sizes and shapes. Printdesigns was one of the original dealers of this product and we have worked closely with the manufacturer, Eve Products ever since.
To date, there have been only two iterations of the Twist Banner Stand system. That is the 'Original Twist' banner stand that was sold between 2003 and 2024 and the new 'Twist2' banner stand that has superseded the original product being available since summer 2024.
How Do Twist Banner Stands Work?
Twist banner stands are relatively simple structures that consist of a support base, a sectional pole and a graphic that is printed onto a heavy, yet rollable material.
The print is fitted with a rail at the top and bottom rail that allows the print to connect to the support base and hook over the support pole. The top rail is 'springy' which allows the printed panel to be pulled under tension when it is attached to the frame.
Twist banner stands connect using magnetic tape that is applied to the rear vertical side edges of the printed panels. The printed panels are pushed together so they are touching one another and then a series of small magnetic bars are used to bridge the join between the two panels at the back. This keeps the two panels held firmly together.
Create An Arrangement Of Twist Banner Stands To Fit Almost Any Space
Twist Banner Stands are available in a choice of width and height. Any number of Twist Banner Stands can be connected to create larger display walls or it is possible to insert flexible 'Flexilink' panels in between any two Twist Banner Stands to create curves. Printdesigns has a wealth of experience with the Twist Banner Stand display system and can help you plan the best arrangement of stands to fit almost any available space.
Our Twist2 Panel Layout Guide contains a myriad of pre-configured arrangements of Twist Banner Stands to fit common floor sizes but if you don't see what you need, please reach out to a member of our team who can help.
We offer high-quality printed graphics for all types of Twist Banner Stand including the Original Twist Banner Stand, the Twist2 Banner Stand and all other derivatives of the system including Media/AV Twist Stands.
Our graphic panels are printed onto stoplight polyester film and are finished with a protective lamination film which makes them highly durable and resistant to marks and scratches. Replacement panels for Twist Banner Stands are supplied complete with the necessary fitments pre-attached including magnetic tape to the vertical side edges of the panels.
If you already own some Twist Banner Stands and are looking to update them with new printed artwork, please reach out to a member of our team who will be able to give you the help and support that you need.
How To Identify The Type Of Twist Banner Stand That You Have?
The original Twist Banner Stand was available since the product's inception in 2004 up until around May 2024 when it was replaced with the newer Twist2 Banner Stand system. If you are not sure which type of Twist Banner Stand you have (Original or Twist2), the two products are very distinguishable from one another as the support bases are a different colour and design. Note also that the dimensions of some Twist Banner Stand panels vary between the Orignal Twist and the later Twist2 solution so if you are ordering new printed panels, it's important to let us know which type of stand that you have.
The Original Twist Banner Stand support base is silver in colour and the slots in the base where the print connects are round in shape
The new Twist2 Banner Stand base is slightly different in appearance to the Original Twist Banner Stand. The slots where the print connects are rectangular in shape.
Twist Banner Stand 3D Design Software
Free 3D design software is available for the Twist Banner Stand that allows you to create and plan your stand layouts without the need for specialist 3D design skills. The software is available for Windows and Mac desktop devices plus mobile devices via the Apple App Store and Google Play Store. The Eve Products application uses a simple drag-and-drop interface whereby you can place Twist Banner Stand products into a floor space of any defined size and manipulate the shape and arrangement of the components to effectively plan your event.
