The WaveLight® Air Backlit Inflatable Tower is a 360° illuminated marketing display that can light up a room, drawing maximum attention at your event or exhibition. Wavelight Air Towers can go from flat packed to fully assembled in around 1 minute using an optional air pump and can be deflated equally quickly with a push of a button. Bespoke printed fabric graphics are included with the counter and these can be replaced in the future should you wish to change your messaging.
Available In Circular Or Square Shapes
WaveLight® Air Backlit Inflatable Towers are available in a choice of either circular or square shapes depending on preference. Each shape option provides 360° visibility which makes this display tower ideally suited for use in open spaces at events and exhibitions whereby pedestrian traffic could be approaching from multiple directions.
The printed graphics for circular or square shaped WaveLight counters are printed onto a fabric specifically designed for backlit illumination. The print is sewn with a silicone beading that push-fits into a channel on the top and bottom of the counter. When the counter is inflated, the print is pulled tight to give a smooth, wrinkle-free finish.
Square Shaped Wavelight Air Towers
Square shaped Wavelight Inflatable Towers are available in a choice of 1500mm, 2000mm or 2500mm height. The footprint measures 800mm x 800mm for all height options.
Circular Shaped Wavelight Air Towers
Circular shaped Wavelight Inflatable Towers are available in a choice of 1500mm, 2000mm or 2500mm height. The diameter is 860mm for all height options.
How Do WaveLight Air Towers Work?
WaveLight Towers employ a highly durable, transparent air bladder that is separated by the top and bottom of the unit. The air bladder can be inflated via a valve located in the square or round shaped end. When inflating the air bladder, the top and bottom of the tower are pushed apart until it is fully inflated whereby the tower becomes remarkably strong and rigid.
Backlit illumination is achieved via LED lights positioned within the air bladder. These LED's provide bright illumination within the core of the tower that projects to the exterior surface.
Printed fabric graphics are fitted over the top of the transparent air bladder and are produced with a specialist backlit material that diffuses the light from within. The graphics are attached with a push-pit silicone beading allowing them to be removable and replaceable.
Optional Electric Pump
Wavelight Air Counters can be inflated using a manual or electric pump with the relevant twist lock adapter fitting.
If you do not own a suitable pump, our optional 500W electric pump is recommended and provides rapid inflation of WaveLight Air Towers in 1-2 minutes.
Optional Lithium Ion Battery Pack
If you don't have convenient access to power at your event, our optional lithium ion battery packs can be used to illuminate our range of WaveLight Towers and Counters.
The 16AH batteries come with a charging adapter and provide between 2 and 4 hours of illumination each depending on the size of the tower.
You can purchase two batteries together and rotate them (charging one pack while using the other) to provide constant illumination of your display for longer periods of time should you need it.
Battery Weight: 2.26KG
Tough Durable Storage Case Included
WaveLight Air Towers are supplied complete with a semi rigid packing case as standard.
Made from recycled nylon, the case measures approximately 860mm x 860mm x 180mm and the packed weight is approximately 18kg.
The case has a carry strap and allows convenient storage and transport of your WaveLight Air Tower to and from events
Helpful Support And Advice Should You Need It
If you have any questions about Wavelight Air Towers, our team are on hand to assist. Artwork set up templates for all shapes and sizes of WaveLight Air Towers are downloadable but should you require support or help with the setup of your artwork, please reach out to a member of our team who will be happy to help.
